Maxim Power Tools (Scotland) LTD | Welcome

Classification: IM2cT6


BANDSAWS AIR

• Ideal for cutting Steel Sections, Pipe and Chain in hazardous atmospheres and wet environments.

View further product information here.

View Spitznas's site here.

Classification IM2cT4


CHIPPING HAMMERS AIR

• For scaling, chiseling, removing concrete build-up from the side of cement mixers, light concrete demolition and cement finishing and many other applications.

View further product information here.

View Spitznas's site here.

Classification: 1M2cT5


CHAINSAWS AIR

• Powerful, efficient cutting of wood and plastic; used for many years.

View further product information here.

View Spitznas's site here.

Certification IM2cT6 | II2GcT6


ROTARY HAMMER DRILLS AIR

• Ideal for anchor holes in concrete.

• Uses SDS Plus & SDS Max Carbide Drill Bits.

View further product information here.

View Spitznas's site here.

Classification II2GCT6


DRIVE UNITS AIR

• Ideal for heavy-duty reaming, tube expanding and tapping.

• Perfect for special driving applications, including pipe tapping and valve turning.

View further product information here.

View Spitznas's site here.

Classification II2GcT6


FANS AIR

• Explosion Proof.

• For use in Ex Zones and Hazardous Environments.

• 12" - 300mm to 24" - 600mm diameter.

View further product information here.

View Spitznas's site here.

Classification EEX-e-IIT3


FANS ELECTRIC

• Specifically made to meet the requirements of ATEX Directive 94/9/EC (Atex 95a).

• High quality, strong and reliable with Casings and Impellars made from materials which reduce the risk of generating heat or sparks if there should be an operational problem.

View further product information here.

View Spitznas's site here.


AXIAL FANS

• Ideal for ventilation, removing films, emptying tanks and cooling equipment.

• Approved by Germanischer Lloyd for use in the cargo area of Oil Tankers. Because of their construction they operate with minimum maintenance under the most arduous conditions.

• These fans can be fitted with extra Protective Grills, Stands, Flanges and Reducer Cowals.

• All available as ELECTRIC versions in a variety of voltages.

View further product information here.

View Spitznas's site here.

Classification II2GcT6 | IM2cT6


IMPACT WRENCHES AIR

• Light, Standard and Heavy Duty.

• ”, ”, 1” and 1” Square Drive.

View further product information here.

View Spitznas's site here.

Classification IM2cT6


NUTRUNNERS AIR

• Ideal for turning valves, tightening, tapping, reaming, pipe bevelling, expanding and more.

• Lightweight and reversible.

• Compact angle head allows access to confined spaces.

View further product information here.

View Spitznas's site here.

Classification: II2GcT5


RECIPROCATING SAWS AIR

Safety Lever Throttle

• Cutting Capacities: 635 mm diameter Pipes or 300 mm wide Flat Sections.

• Supplied in metal carrying case.

• Hydraulic and Underground versions available.

View further product information here.

View Spitznas's site here.


METAL CIRCULAR SAW

PNEUMATIC

View further product information here.

View Spitznas's site here.


DRILLING MACHINES

• A selection of Heavy Duty Drilling Machines.

• The choice of Standard and Reversible from No.1 to No.4 Morse Taper.

View further product information here.

View Spitznas's site here.

Classification IM2cT5


SABRE SAW AIR

• Hand held.

• Ideal for cutting small section pipes and profiles, bolts, cable and many others.

View further product information here.

View Spitznas's site here.


SCALERS, HAMMERS, BREAKERS
 

• Needle Scalers and Pick Hammers

• Light Riveting and Chipping Hammers

• Medium Heavy Rivettng and Chipping Hammers

• Shear Hammers and Counter Bracket

• Spaders, Concrete Breakers and Pick Hammers

• Sand Rammers

• Accessories

View further product information here.

View Spitznas's site here.


PIPE CUTTING MACHINE PNEUMATIC
 

• Industrial design.

• Cutting and chamfering in two performance categories.

View further product information here.

View Spitznas's site here.


PIPE CUTTING MACHINE HYDRAULIC
 

• Industrial design.

• This hydraulic pipe cutting machine is the most powerful machine of our range.

View further product information here.

View Spitznas's site here.

Classification II2GT5


JSZ LOCKING TRIGGER

• Use only mounted on a Cengar Clamp for cutting Sections and Pipe up to 300mm dia.

• Supplied complete with Clamp and Blade Guide.

• Supplied complete with Pipe/Profile Clamp and Blade Guide.

View further product information here.

View Cengar's site here.

Classification II2GT5IM2


JSM FOR MINING

• Use only mounted on a Cengar Clamp for cutting Sections and Pipe up to 300mm dia.

• Supplied complete with Clamp and Blade Guide.

• For use in underground coalmining.

Please Note: Clamps for all Reciprocating Saws can be supplied with automatic feed option.

View further product information here.

View Cengar's site here.

Classification II2GT5


CL75 with 19mm Nosepiece

• Hand held or mounted on a Cengar Clamp; used for cutting heavier sections and Pipe up to 150mm dia.

View further product information here.

View Cengar's site here.

Classification II2GT5


CL50 with 12mm Nosepiece

• Hand held or mounted on a Cengar Clamp; used for cutting heavier sections and Pipe up to 150mm dia.

View further product information here.

View Cengar's site here.

Classification II2GT5


PL905 with 12 or 19mm Nosepiece

• Hand held only for cutting steel flange bolts, small pipe and sections and GRP up to 50mm thick.

• Fast cutting under load.

• Small which allows it to be used in confined areas.

• Steel body.

View further product information here.

View Cengar's site here.

Classification II2GT5


AIR SAW JP901

• Hand held for cutting thin materials and G.R.P. up to 6mm thick.

• Fast cutting under load.

• Use one handed for cutting out shapes and holes.

View further product information here.

View Cengar's site here.


WORKLITE

• The new powerful portable battery powered unit replaces the FLX.

• Three versions available (WL-70 | WL-80 | WL-85)

View further product information here.

View Wolf's site here.


TANK LIGHTING KIT

• A set of four lamps and G.R.P. or Stainless Steel Transformer 110 or 240v.

• Ideal for tank cleaning, shotblasting and painting applications.

View further product information here.

View Wolf's site here.


LED FLOODLIGHT WF-300

• Lightweight portable Floodlight for temporary lighting applications.

• 24 and 100-250v.

• Designed for heavy industrial use on and offshore.

View further product information here.

View Wolf's site here.


FLOURESCENT LEADLAMP LL-500

• Strong, compact and ideal for extended periods of temporary lighting.

• Emergency lamp available in 110 or 230V.

• Supplied with two or four 360 degree Tubes in a range from 24 to 254v.

View further product information here.

View Wolf's site here.


TEMPORARY LUMINAIRE LL-580 & 580E

• A stronger version than the Fluorescent one.

• Can be linked together when energised.

• Two 36w forward facing tubes.

• Available in a range from 24v to 254v.

• Both standard and emergency.

View further product information here.

View Wolf's site here.


LEADLAMP LL-12, 24 & 42

• Available in 12, 24 or 42v versions.

Transformer: 110v with 2 or 4 24v outlets.
  230v with 2 or 4 24v outlets.

View further product information here.

View Wolf's site here.


AIR TURBOLITE A-TL 44A & 45A

• Bay Light and Floodlight versions 250w Halogen.

Please Note: Brass version available for Mining Zones 21 & 22.

View further product information here.

View Wolf's site here.


HAZARD WARNING LAMPS HL-95

• Available with Amber, Red and Blue LED’s.

• Primary Cell long life batteries, 500 to 1500 hours.

View further product information here.

View Wolf's site here.


LAMPS HANDHELD

• The Wolflite H-4DCA primary cell powered safety handlamp is for use where a wide range of potentially explosive gases, vapours, mists and dusts are present.

• The Wolflite ATEX Rechargeable Handlamp is ideal for use as a general purpose safety lamp for inspection and work tasks in explosive atmospheres.

• Rechargeable battery operation offers a convenient and cost effective solution for Ex applications where a handlamp is frequently required for long periods.

View further product information here.

View Wolf's site here.


RECHARGEABLE TORCHES

• R30 4.0w Halogen.

• R50 3.0w LED.

• A new product generating a stronger, brighter light than most hand lamps.

• Five versions available.

View further product information here.

View Wolf's site here.


HANDHELD TORCHES

• The Safety Torch range offers the perfect answer for every Ex application, with reliable, simple and cost effective solutions.

• The range includes T4 and T6 models with straight or right-anglebody style.

• T4 models give outstanding light output.

• The T6 approval allows use in any Zone 1 or 2 atmospheres, with optimum light output in this temperature class, and a 5 hour duration.

View further product information here.

View Wolf's site here.


HEADTORCH HT-650

• Explosive gas, vapour and mist certified, High power LED light source.

• Lightweight, ergonomic design, Hands free operation.

View further product and accessories information here.

View Wolf's site here.


MICRO & MINI TORCHES

• New range of lightweight Torches using Primary Cell Batteries.

View further product information here.

View Wolf's site here.


WOLFLITE XT-50, XT-70, XT-90 & XT-75

• ATEX and IECEx certified for use in Zone 1 hazardous areas.

• Ultra bright high power LED light 350+ lumens.

• Spot and flood switchable beam options.

• Up to 9 hours duration on full power, 18 hours in powersave mode.

View further product and accessories information here.

View Wolf's site here.


WOLF LINKEX LX-400

• ATEX and IECEx certified for use in Zones 1 and 2 explosive gas and dust atmospheres.

• High power, low maintenance LED light source 'Fitted for Life'.

• High and low input voltage versions available.

View further product and accessories information here.

View Wolf's site here.


IMPACT WRENCHES CP6748/68/78

• Designed for intensive use.

• Reliable: Long lasting steel motor.

• Intensive Use: Steel clutch housing robust and durable.

• Ergonomic: One hand control for reverse and power setting.

• Flexibility and Safety: Quick and positive socket retention

View further product information here.

   
   

AIR DRIVEN VACUM CLEANERS

• Powerful, portable Vacuum Cleaners for collecting dry solids, powder, metal, stones, oil and sludge.

• Can be easily converted from WET to DRY by fitting an internal basket and filter bag.

• Waste is collected in a bag or the metal container and emptied by tipping, or, for liquids, opening the Drain Cock.

• 50 and 200 litre capacity.

View further product information here.

View Spitznas's site here.


RECIPROCATING SAWS ELECTRIC

• Ideal for cutting pipe, tanks, structural steel, profiles and other materials.

• Designed for the toughest service in refineries, chemical plants, utilities, pipelines, construction, offshore oil and demolition applications.

View further product information here.

View Spitznas's site here.


NEEDLE/CHISEL SCALERS

• Provide a thorough and effective means of removing coatings, corrosion and other accumulated materials.

• These scalers will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.

• Needle scalers, when converted to chisel scalers, can commonly be used for applications such as chipping, weld dressing and brick/stone cleaning.

View further product information here.

Visit Trelawny's site here.


SCALEFORCE ELEVEN MULTI-HEAD SCALER

• Breaking down hard coatings prior to floor blast cleaning, reducing cost of spent blast media.

• Marine industry for removing rust, scale and paint from ships decks.

• Tank cleaning.

• De-scaling bottom of tanks.

View further product information here.

Visit Trelawny's site here.


LONG REACH SCALER

The most flexible tool for all kinds of cleaning, scraping and scaling applications.

Multi applications for the removal of :-

• Residues
• Ice
• Metal slag
• Tank cleaning
• Chemical spillages

When ordering please specify if Needle or Chisel type Tools are required.

View further product information here.

Visit Trelawny's site here.

VENTURI
FIBREGLASS VENTILATORS

• Lightweight.

• Portable.

• For localised fume removal and ventilation.

View further product information here.

CLUSTAJET
VENTILATORS
Non Atex

• No moving parts - means the Clustajet is maintenance free.

• No electricity required - means they are safe to use in damp or wet locations.

• Adjustable flow control - using the control valve.

View further product information here.

 
    TOP