Return to Home Page


.ACCESSORIES

TEMPLATES

Can be used on a minimum of two different rail sections.

Overhead Locator - For four or six hole Fishplates.

When ordering the above please specify the rail sections to be drilled.

RAIL CUTTERS

The two types of annular cutter for specific use on rails are: RCV M42 High-Wear Cutter: 13mm - 52mm diameter x 25mm and 50mm in length. CRWC Tungsten Carbide Tipped Cutter: 18mm - 36mm diameter x 25mm in length.

Standard Rail High Wear Manganese Rail
SRCV130      
SRCV160   SCRWC180  
SRCV220 39/005021 SCRWC220 39/009432
SRCV290 50/003010 SCRWC290 39/00303
SRCV300 39/005023 SCRWC300 39/009434
SRCV310   SCRWC310  
SRCV320   SCRWC320  
SRCV330   SCRWC330  

PRESSURISED CUTTING FLUID DISPENSER

Each rail drilling machine is supplied with a Cutting Fluid Dispenser, Cutter Pilots and Cutting Fluid.

The performance, speed and life of the Cutter will be significantly improved by its sustained use through the cutting cycle.

CARRYING/STORAGE CASE

A robust, lightweight case is available for carrying and storage of the machine.

PILOT PINS

Pilot Pins for standard length Cutters: 25mm long Cutters SRA25 50/014001
Pilot Pins for long length Cutters: 50mm long Cutters SRA50

CUTTING FLUID

1 Litre Tins. RD208. 39/017437
5 Litre Tins. RD229. 50/006002
25 Litre Tins. RD220. 50/006001