for Spare Parts list.
be used with any suitable Compressor.
Must be used with Dri Air Unit below.
PNEUMATIC RUSTY CLIP REMOVER
not a production tool the machine can be used in
a comfortable standing position or suspended on
the Master Trolley to protect the operator from
back strain and limiting exposure to Hand Arm
shows the Rusty Clip Remover mounted on a Master
Trolley which is the subject of a seperate
Max Air Pressure
Sound Power Level
Sound Pressure Level
Vibration Level (Hand Held)
EAV - 27 mins
ELV - 109 mins
36 Cfm (17 L/sec)
Approximately 300 clips
Approximately 1300 clips
|Length with steel
Length without steel
Weight with steel
Weight without steel
here for Accessories.
here for Spare Parts list.
choice of connectors can be supplied at extra
specify type with order.
Removes over 95% of the water found in airlines.
DRI AIR UNIT
in the air is compressed and turned into water
droplets in the airflow, which if allowed to will
quickly clog and destroy expensive airtools. This
is particularly so in the case of outdoor
compressors which draw in cold damp air.
The Maxim Dri-Air Unit removes the water, and
other fluids such as compressor oil, and
automatically discharges to a suitable container.
The clean air is then supplied with a mist of air
tool oil, such as Cengar Green Oil, lubricating
your air tool and protecting against further
The filter unit is rugged, stable, service free,
and gives long life due to the use of non
corrosive materials, and is ideal for site
operations and workshops alike.
Use with Rail Clip Remover or seperately with
other air driven tools and equipment.
|Airflow - 50cfm
capacity (24 litres per second)
9.5Kgs (exc. fittings)
splitter and taps fitted for illustrative
capacity units made to order.