The LED Floodlite is CE marked to the ATEX Directive and IECEx Certified, for safe use in Zone 1 potentially explosive gas and Zone 21 explosive dust atmospheres, where a T4 temperature class permits.

Delivering an impressive flood of brilliant white light from an array of 48 high power LEDs, the WF300 LED Floodlite has an output of 3,300 lumens, equivalent to a 200w halogen incandescent lamp, but because of the far greater efficiency, it has significantly lower power consumption at 58 watts. One benefit of this is that the unit runs at a much lower temperature, eliminating the risk of burns when handling.

The WF300 range of lamps is supplied with collimating optics delivering a piercing 30° ‘medium’ flood of light for maximum versatility in hazardous area activities. A version delivering a wide angle flood beam is available to special order. LED light sources have an inherently greater robustness than comparatively fragile filament lamps, the LEDs fitted to this floodlight have an estimated life of up to 100,000 hours, therefore the ATEX LED Floodlite is a very low maintenance, highly reliable unit.

The WF300 LED Floodlite is cable powered, and can be run with voltages of 100 to 254V AC or 24 AC/DC. Lamps are supplied with 10 metres of SY cable as standard, fitted with an ATEX plug to suit intended supply voltage (110V, 230V or 24V). For mains voltages a lamp fitted with an ATEX socket is available allowing quick and easy setup of multiple LED Floodlites.

The LED Floodlite has a robust marine grade aluminium alloy enclosure with corrosion resisting epoxy powder coating, designed to withstand the rigours of harsh industrial and offshore applications; the lens is an impact-resistant polycarbonate transparent cover which is replaceable, however, in blasting and painting applications it can be protected from damage using a disposable anti-static lens film. The lamp is sealed dust tight and protected from water immersion with a certified IP66/67 enclosure.

The Wolf LED Floodlite is a lightweight and compact unit, ideal for use in portable and temporary applications. It is supplied with a stainless steel bridle with pivot angle adjustment, bolted to a stainless steel lamp stand for additional protection. The lamp and bridle can easily be detached and bolted to various additional accessories available from Wolf, including magnet fixings and a tripod stand, making this a truly versatile lighting solution for temporary lighting installations and activities in hazardous areas.